As part of our range of materials we are able to offer a range of castables to complement most applications. The dense castable range of materials we supply are made from selected raw material, aggregates and cements. The careful selection of raw material provide goods in this range with a range of properties and characteristics.

Standard Dense Castables
A range of material to cover the range of temperatures from 1400 C to 1800 C. These products are the most suitable for a wide range of applications ranging from boiler work, general furnace applications, burner blocks to specialty muffle furnaces. As part of this range we carry 1450, 1600 and 1650 grades for the majority of general castables work.

Gunning Castables
A selection of specialty raw material is used to produce a range of Gunning Refractory. This material is mixed with water at the nozzle of the gunning equipment to enable easy placement of castable. This method is very suitable for placement of bulk material in applications where conditions make formwork unpractible or too time consuming. The temperature range varies from 1400C to 1800C to suit most applications.

Low Cement Castables
A range of castables with lower cement content than standard dense castables. Varying in Alumina content these products have excellent physical properties. Low porosity, high strength and good abrasion resistance are features of low cement castables. Generally these products require controlled installation including mixing, water addition and high frequency vibration placement.

Abrasion Resistant
Where conditions are extreme a range of Abrasion resistant dense castables are available. These castables are available as Gunning and Low Cement as well as in the Conventional style of castable.

Insulating Castables
As the name describes we supply a range of castables with specialty materials and low densities. These products range from materials with temperatures of 1000C and densities of 400kg/m3 up to 1750C with densities up to 1850 kg/m3. Insulating castables are used as either a back up lining or for hot face work. As a back up lining they can be found behind brick work or behind dense castables where protected they help to reduce the overall density of the lining or to reduce the cold face temperature to something suitable for people to work near. As a hot face they are used in areas where wear and tear is not generally a problem. There low density generally means that the insulating range of castables have only low to medium strength making them not suitable to abrasion or particle attack. As a hot face they are used in boilers and furnaces where they are not subjected to punishment.

Our range of material covers all of these types of product for applications as varied as boiler work to high velocity burners and waste incineration shaker hearths. As part of this range we also have specialty materials that have additions of Chrome Oxide, Silicon carbide and Non-wetting agents for specific applications.

We supply the following range of materials -

• Densecast
• Litecast
• Tufcast
• Tufpore
• Tufgun
• Tuflite
• Moral Cast
• Moral Hicast
• Moral Coolcast
• Pyrocrete
• Pyrolite

If you require material that is not listed here please contact us and we would be pleased to assist.